Unlock LG G-Slate Bootloader On Honeycomb 3.1 [How To]
Disclaimer: Please follow this guide at your own risk. AddictiveTips will not be liable if your device gets damaged or bricked during the process.
Requirements:
- A rooted LG G-slate running Honeycomb 3.1. See our guide on rooting the LG G-Slate On Honeycomb 3.1.
- (https://dl.dropbox.com/u/8148018/trythis.zip) Bootloader unlock package.
- (https://goo.gl/QWhT4) LG Drivers.
- (https://goo.gl/nU6YO) ClockworkMod Recovery 5.5.0.2.
- (https://goo.gl/6Rv3v) Fastboot for Windows | (https://goo.gl/tnXFl) for Linux.
Instructions:
- To begin, download the, recovery and Fastboot packages from the links above.
- Extract the recovery and place it in the folder where fastboot.exe is.
- Copy the bootloader unlock package to the root of your SD card.
- Boot the device into fastboot mode and connect it to the computer via USB.
- Open command prompt or terminal, navigate to the location of fastboot.exe and enter the following commands (For Windows and Linux respectively):
./fastboot oem unlock ./fastboot boot recovery.img
or
./fastboot oem unlock ./fastboot boot recovery.img
- In the recovery, navigate to Install ZIP from sdcard > Choose ZIP from sdcard and select the root.zip package.
- Once the file is flashed, reboot the device.
I have tried and tried and I cannot get my computer or adb to see my G Slate in fastboot mode. I know I can add a specific driver, but I am not sure which one works. I am lost, please help.
Not sure if you are still looking for this but I installed PDanet, when installing make sure you select LG drivers.. that worked for me. Good luck
Thanks! PDAnet finally installed the fastboot driver on a Win7 x64 box