Install Leaked Android 2.3.4 Gingerbread On Samsung Galaxy Mini S5570

We have confirmation of an Android 2.3.4 Gingerbread leak for the Samsung Galaxy Mini S5570, and it is ready for download. The ROM shows a build date of June 2, 2011 and has been upped by Samfirmware for downloading. Needless to say that it’s based on Android 2.3.3. Read on to download and install the ROM on your Galaxy Mini.

This ROM is perfect for users who want the latest firmware running on their device, while keeping a stock ROM. Flashing this ROM, will remove all root access if your device was previously rooted. While this ROM may not appeal to avid android users, it however does give developers a chance to develop on and to improve it with further customizations. For now, feel free to mess around with this tailor made, stock Gingerbread ROM.

Disclaimer: Please follow this guide at your own risk. AddictiveTips will not be liable if your device gets damaged or bricked during the process.

Requirements:

• (https://hotfile.com/dl/145766351/d0cbbbe/S5570XXKPI_SERKPI_XXKPI.zip.html) Android 2.3.4 KPI ROM. (password for extraction is samfirmware.com)
• Samsung USB drivers installed. Download USB drivers for (https://drivers.softpedia.com/progDownload/Samsung-Galaxy-S-USB-Driver-for-Windows-x86-Download-96692.html)32 bit Windows | (https://drivers.softpedia.com/progDownload/Samsung-Galaxy-S-USB-Driver-for-Windows-x64-Download-96693.html) 64 bit Windows.
• (https://addictivetips.com/app/uploads/2011/03/Odin-1.7with.pit_.512.803.zip) ODIN installed on your system.

Instructions:

1. To begin, download the firmware from the link above and extract it.
2. Put your phone into download mode by holding down the Volume Down key and pressing the Power button.
3. Run ODIN and click on PIT to choose the pit file from the folder where you extracted the ROM. Make sure Re-partition is checked in ODIN.
4. Click on PDA and choose the ROM file when prompted. (It will be the one over 100mb.)
5. Click on Phone and select the file starting with the name MODEM.
6. Lastly click on CSC and select the file starting with the name CSC.
7. Once done, connect your phone to the computer via USB and once you see the device connected in ODIN, hit the Start button.
8. ODIN will start flashing the ROM, and once done, your phone will reboot. You can unplug the phone from your computer.

That was it, if you did it right, the phone should now boot into the new Android 2.3.3 based firmware.

[via samfirmware]

Read Full Bio

Zayed Rehman

Studying Development Sciences in the humble pursuit of saving this world; making occasional contributions to the world of Android. | Find me on Google+

Latest from Author

Chainfire’s 500 Firepaper Auto-Rotates Your Android Wallpaper Between 500px Photos Use Your Android Device To Listen To Emails And News On The Go